【“LIVagain”】The ion power revitalizes Car battery!

Usage

Improving the reliability of various lead-acid batteries and suppressing self-discharge

Note
However, it cannot be used for batteries in the following conditions.

• Battery voltage is less than 8V.
• Electrolyte turns brown.
• Damaged battery plates due to overcharging.
• Over discharge due to long-term storage.
• Maintenance-free type of car battery.
• The composition of the battery liquid is different from usual due to other company's battery strengthening agent (Germanium type, Carbon type, etc.).

Usage

Add 0.5% or more of the electrolyte to each cell as a guideline. Be careful not to press the “LIVagain” container too hard, as the inner stopper may come off and fall off. You can use it with the inner plug removed.

Container material

PET/LDPE, dispose of according to local regulations after use.

feature

“LIVagain” is the world's only sulfation melting agent that successfully melts lead sulfate crystals (sulfation), which is a major cause of the life of lead batteries, for the first time in the world, and is proven by measurement data of public institutions. In addition, it is a new technology lead battery revival agent that greatly contributes to resource and environmental protection.

Principle①

The electron energy of lead is 0.08 eV, so the device is used with this electron when discharging, but when charging, it is done with copper electrons with an electron energy of 0.07 eV.
In order to eliminate the energy difference between the electron energies of 0.08 eV and 0.07 eV, part of the lead becomes crystals of lead sulfate (sulfation) and continues to emit electron energy of 0.08 eV.
As long as it is charged with the electron energy of copper, 0.07 eV, it is impossible to melt lead sulfate crystals.
“LIVagain” uses solvated electron water with an electron energy value of 0.7 eV, so it can easily dissolve lead sulfate crystals (sulfation).

LIVagain Ingredients List

CAS

Solvated electron water[-e(H2O)4]

No 7732-18-5

Carbon Black[C]

No 1333-86-4

Polymer[PVA]

No 9002-89-5

Principle②

As shown in the chemical reaction formula of a lead battery, positive electrode: PbO2 + 4H + ∔SO4 2-✙2e-, when lead and sulfuric acid combine, the two electrons emitted are not released separately, but are paired electrons. is emitted as There is a law of the universe that when a fermion electron pairs up, it behaves as a Bose particle. In contrast to discharge as Bose particles, fermion electrons are currently charged as they are, so crystal sulfation of lead sulfate could not be eliminated. (Solvated electrons), which are the main component of “LIVagain”, always exist in pairs, so sulfation can be easily eliminated by allowing them to exist in the electrolyte.

JQA data

Verification test

In F City, H Prefecture, Chugoku region, 10 new vehicle collection and delivery vehicles (1.5 tons) to be dispatched to F Express Tokyo and Osaka sales offices. After adding 4cc of “LIVagain” to each cell of 10 new 40A batteries, it was time to replace the batteries. A follow-up survey was conducted, and it was confirmed that all 20 units had been in operation for more than 36 months.
By the way, the company's conventional battery life is reported to be 11 months.
However, S Express has an average battery life of 8 months, so it's not particularly short.
It can be understood that idling stop, frequent use of hazard lamps, and short driving distances in urban areas are using the battery more than expected.
*Diesel engine cars seem to have a lot of trouble starting in the morning in the cold season, but “LIVagain” will free you from that trouble.

*There is no problem with the amount of LIVagain injected too much.