Why “enefuture” saves air conditioner electricity bills

Principle of energy future

Why does energy efficiency improve when using “enefuture”? If you have any doubts, please read I want to know more about similar products, “ionwave”. Although the principle is the same as “ionwave”, “enefuture” uses solvated electrons to work on refrigerant lubricating oil with poor fluidity, which is used in air conditioners, and improves heat exchange efficiency by increasing fluidity.
There are sunshade products for outdoor units are on sale. That is because it is improved the heat exchange efficiency by lowering the temperature around the heat exchanger as much as possible by providing a shade. The heat exchanger uses aluminum, which has high thermal conductivity, but the problem is the CFC alternative used in the refrigerant. CFCs used to be used in the past, but as you know, CFC substitutes are now being used because they destroy the ozone layer. It seems that Another problem is that CFC alternatives have poor fluidity, so they are used by mixing about 20% lubricating oil to improve fluidity. Poor fluidity prevents smooth heat exchange in the heat exchanger. “enefuture” has the effect of increasing the fluidity of this lubricating oil. As a result, thermal conductivity is improved, heat exchange is performed smoothly, and power consumption is reduced.

The energy-saving products “enefuture” at our store are energy-saving products for home air conditioners of 3kw to 12kw.
When saying about energy saving, it’s not mean just lowering the electricity bill. By installing “enefuture”, the thermal conductivity of the refrigerant lubricating oil is improved with solvated electrons, so the temperature at the air outlet is lowered if it is for cooling. If it is heating, it will rise, so if the set temperature is set to 28 degrees, the air outlet wind will come out at 28 degrees. Therefore, it operates according to the set temperature. Conventionally, the load increases because the desired temperature cannot be obtained unless the cooling set temperature is lowered. When installed “enefuture”, the load will go down, and your electricity bill will be decreased than before.

Here is the results of our staff testing.

“enefuture” air conditioner installation test

Test date

June 25, 2022

Test method

Turn on the air conditioner in the living room at 11:00am and start operating

１．At 15:00, install a temperature measuring device so that the outdoor temperature and outlet temperature can be measured.

２．Check the remote control set up at 15:15pm

The air conditioner setting is Eco automatic operation and cooler set at 28.0 ℃
29°C indoors and 39°C outdoors compressor.

Thermometer shows 40.3°C outdoors, air outlet temperature 15.4°C

３．15:20pm installed “enefuture”

４．15:30pm 10 minutes after “enefuture” installation

Thermometer shows outdoor temperature 39.6°C, air outlet of air conditioner temperature 11.1°C which comes down 4.3°C lower.
The air conditioner setting is the same at 28°C in the eco automatic operation

With the air conditioner, the room temperature dropped by 1°C from 28°C indoors to 39°C outdoors.

５．15:32pm 12 minutes after “enefuture” installation

The thermometer shows an outdoor temperature of 39.8°C, and air outlet temperature is 12.1°C, dlopped 3.3°C lower from before installation.

６．15:44pm 24 minutes after installation of “enefuture”

The thermometer shows an outdoor temperature of 39.4°C, and air outlet temperature is10.5°C, dropped 4.9°C lower from before installation.

７．15:44pm 24 minutes after installation of “enefuture”

The air conditioner setting is the same at 28°C in the eco automatic operation
The air conditioner is 29°C indoors and 39°C outdoors, the same as before installation

Test result

The air conditioner is set to 28°C indoors, but the temperature of the air outlet has dropped by 4°C, so in the living room where the sun shines on a very hot day, the air conditioner's outdoor unit is quieter than usual, and the wind is blowing comfortably. There are several causes of noise in the outdoor unit, but when the refrigerant exchanges heat, the greater the difference in temperature between indoors and outdoors, the greater the processing load on the air conditioner and the louder the operating noise. It is thought that the noise was reduced by improving the heat exchange rate of the refrigerant. Since then, we have continued to operate the system, and we feel that the noise level is lower than before, even on hot days that continue for several days.

How is it?

For home use, no special construction is required. Why don't you cooperate with SDGs by installing “enefuture” for future saving energy?

Precautions for use

• There are individual differences in the effect, so we do not guarantee cooling/heating enhancement or power saving.
  Do not open and drink.
• For disposal, make a hole in the pack and discard the water inside, and dispose of the pack separately with non-burnable garbage.
  （The materials are nylon, polyethylene, and aluminum foil. Please dispose of them according to the regulations of each municipality.）

Originally, “enefuture” has been provided to the industrial use more than 10 years, and has been repackaged for home use.

For business purposes, we may ask you to use it as a test at the proposal stage so that you can feel the improvement. Please review the test case before its official introduction.